COMP3811辅导、辅导Java/Python程序

日期：2022-11-10 07:13

Coursework 1
Contents
1 Submission Instructions 1
2 Tasks 2
2.1 Setting Pixels . . . . . . . 2
2.2 Drawing Lines . . . . . . 3
2.3 2D Rotation . . . . . . . 3
2.4 Drawing triangles with
the half-plane test . . . . 4
2.5 Drawing triangles with
barycentric coordinates . 4
2.6 Blitting images . . . . . . 5
2.7 Your own space ship . . 5
Coursework 1 focuses on basic graphics operations in 2D, including manipulating images, drawing lines and
triangles, and blitting images. Coursework 1 is to be solved individually and determines 30% of the total
mark for COMP3811.
Before starting work on the CW, make sure to study this document in its entirety and plan your work. Pay
particular attention to Section 1, which contains information about submission and marking.
1 Submission Instructions
Your submission will consist of source code and a report. Submissions are made through Gradescope (do not
send your solutions by email!). You can use any of Gradescope’s mechanisms for uploading the complete
solution and report. In particular, Gradescope accepts .zip archives (you should see the contents of them
when uploading to Gradescope). Do not use other archive formats (Gradescope must be able to unpack them!).
See pages on Minerva for additional instructions. The report is the basis for assessment. The source code is supporting
evidence for assertions made in the report.
The source code must compile and run as submitted on the standard SoC machines found in the UG teaching
lab (2.05 in Bragg). Your code will be evaluated using automated tests, meaning that you must use the provided
base code. You must not change the public interface that is defined in certain headers; this will be indicated via
comments in the relevant files. Generally, you are not required to add additional sources or projects. Further,
your code must compile cleanly, i.e., it should not produce any warnings. If there are warnings that you
cannot resolve or believe are in error, you must list these in your report and provide an explanation of what
the warning means and why it is acceptable in your case. Do not change the warning level defined in the handed-out
code. Disabling individual warnings through various means will still require documenting the warning in the report.
The report must be a single PDF file called report.pdf. In this report, you must list all tasks that you have
attempted and describe your solutions for each task. You may refer to your code in the descriptions, but
descriptions that just say “see source code” are not sufficient. Include screenshots for each task (however, do
not include screenshots/images of code - if you wish to include code, make sure it is rendered as text in the
PDF using appropriate formatting and layout).
Apply good report writing practices. Structure your report appropriately. Use whole English sentences. Use
appropriate grammar, punctuation and spelling. Provide figure captions to figures/screenshots, explaining
what the figure/screenshot is showing and what the reader should pay attention to. Refer to figures from your
main text. Cite external references appropriately.
Your submission must not include any “extra” files that are not required to build or run your submission (aside
from the report). In particular, you must not include build artifacts (e.g. final binaries, .o files, ...), temporary
files generated by your IDE or other tools (e.g. .vs directory and contents) or files used by version control (e.g.
.git directory and related files). Note that some of these files may be hidden by default, but they are almost
always visible when inspecting the archive with various tools. Do not submit unused code (e.g. created for
testing). Submitting unnecessary files may result in a deduction of marks.
While you are encouraged to use version control software/source code management software (such as git or subversion),
you must not make your solutions publicly available. In particular, if you wish to use Github, you must use a private
repository. You should be the only user with access to that repository.
Note on plagiarism
You are allowed to discuss ideas with your colleagues. However do not share your code with anybody else.
You must program independently and not base your submission on any code other than what has been pro vided with the coursework and/or in the exercises for COMP3811. As a special exception, you may reuse code
from COMP3811 exercises that you are the sole author of.
You are encouraged to research solutions and use third-party resources. If you find such, you must provide a
reference to them in your report (include information about the source and original author(s)). Never “copy paste” code from elsewhere – all code must be written yourself. If the solution is based on third party code,
make sure to indicate this in comments surrounding your implementation in your code, in addition to includ ing a reference in your report. It is expected that you fully understand all code that you hand in as part of your
submission. You may be asked to explain any such code as part of the marking process. If deemed necessary, you may be
asked to attend a short individual interview with the instructor(s), where you are asked to explain specific parts of your
submission.
Use good commenting practices to explain your approach and solution. Good, thoughtful and well-written
comments will help you show that you understand your code. It will also decrease the chances of accidentally
ending up with submissions similar to other’s work.
Coursework 1 will not require you to use any third-part software outside of what is included in the handed-out
code. You are therefore not allowed to use additional third-party libraries.
2 Tasks
Start by downloading the Coursework 1 base code. Make sure you are able to build it. If necessary, refer to the
first exercise handed out in COMP3811. It uses the same base structure and includes detailed instructions to
get you started.
Although the teaser image looks somewhat like a screenshot from a game, quite a few things that make a
game are missing. This includes functionality like collision detection, sound, game logic, AI, networking, etc
etc. However, most importantly for COMP3811, there are several graphics subroutines whose implementations
are missing as well. Each task that you complete will progress you from the initial empty black screen towards
the teaser image shown on the first page in this document.
Coursework 1 includes tasks for a maximum of 30 marks. Each of the tasks below indicates the maximum
number of marks that you can receive for it. Grading of each task is assessed based on: code quality, including
correctness, clarity, commenting and efficiency; and based on the descriptions and analysis in your report.
Your code must work in both debug and release modes.
2.1 Setting Pixels
Drawing anything on screen ultimately requires you to set a specific pixel to a specific color. In this first task,
you will implement helper functions to do so. Any drawing from here on out will use these helpers, specifically
the Surface:set_pixel_srgb method.
Consider the Surface::set_pixel_srgb and Surface::get_linear_index methods. These are declared in
the Surface class in draw2d/surface.hpp and defined in draw2d/surface.inl. Implement the two
functions in draw2d/surface.inl.
The Surface class uses a RGBx image format, where each color component is stored in a single 8-bit unsigned
COMP3811 - Coursework 1 3
(a) Background “starfield” (b) Magnified view
Figure 1: Task 1. You might need to zoom in to the left image in your PDF viewer to see the individual points. The right
image shows a magnified view of the top-left region.
integer (std::uint8_t). You may set the fourth component (“x”) to zero. It is included to pad each pixel to be
32-bits but otherwise ignored. The image is stored in row-major order.
Important:
? You are not allowed to change the draw2d/surface.hpp header (and, consequently, you may not
change the interface of the Surface class).
? You must keep the assert()-line as the first line of the Surface::set_pixel_srgb function definition.
Add new code below it.
This methods are used to draw the background particle field. Refer to Figure 1 for possible results. You can
move around by first tapping space to enter piloting mode (your mouse cursor should turn into a crosshair),
moving the mouse cursor in the direction you wish to accelerate, and then pressing and holding the right
mouse button to accelerate. Tapping space bar a second time will exit the piloting mode.
2 marks
2.2 Drawing Lines
Next, consider the function draw_line_solid. The function is declared in the draw2d/draw.hpp header
and defined in the draw2d/draw.cpp source file. The function is supposed to draw a solid single-color line
between the points aBegin and aEnd. The color of the line is specified by the function’s final argument.
Implement the draw_line_solid function. The goal is to produce a line that is as thin as possible (single pixel
width) and that does not have any holes (i.e., each pixel should connect to another pixel either by nearest
neighbours or by diagonals). Recall the parametrised version of a line as a starting point. You should ensure
that the function produces correct results with all inputs. Consider edge cases. For full marks, further consider
efficiency. The line should be drawn in the minimum number of operations/pixel writes.
The handed-out code contains an additional program to test your line drawing, tests-line. It includes a
small number of example cases. You can switch between the different cases using the number keys. See source
code comments for brief descriptions of each test (tests-line/main.cpp). The included tests are just a few
examples and are not exhaustive, so you may want to add your own cases.
In your report, explain your method and document what special cases you have found and can handle. De scribe any additional test cases that you have identified.
Note: You must not change the prototype of the draw_line_solid function.
With the line drawing in place, you should now be able to see a space ship (Figure 2a).
6 marks
2.3 2D Rotation
The space ship initially always faces to the right. To make it turn, you must implement a few functions related
to the 2 × 2 matrices:
? Matrix-matrix multiplication: Mat22f operator*( Mat22f const&, Mat22f const& ) noexcept
? Matrix-vector multiplication: Vec2f operator*( Mat22f const&, Vec2f const& ) noexcept
? Creation of a rotation matrix: Mat22f make_rotation_2d( float aAngleInRadians ) noexcept
(a) Section 2.2 (b) Section 2.3
Figure 2: (a) Space ship without rotation, facing the default direction (right). (b) Space ship with rotation, always facing
the mouse cursor when in piloting mode.
(a) Section 2.4 (b) Section 2.5
Figure 3: (a) solid color asteroids. (b) asteroids with slight color variations (see, for example, the asteroid just to the top-left
of the ship in the right hand side image).
The functions are both declared and defined in vmlib/mat22.hpp. Provide implementations for these func tions/operators.
With the implementations in place, the ship should now always face the mouse cursor when in piloting mode
(Figure 2b).
3 marks
2.4 Drawing triangles with the half-plane test
Consider the function draw_triangle_solid. It is declared in the draw2d/draw.hpp header and defined
in draw2d/draw.cpp. This function draws a single triangle defined by its three vertices (aP0, aP1 and aP2),
filled with a solid color. Use the half-plane test to determine if a point/pixel is inside the triangle.
Similar to Section 2.2, you should use the tests-triangle to test your triangle drawing in isolation. Make
sure your method handles at least the included examples successfully.
In your report, explain your method. Document what special cases you have found and can handle. Describe
any additional test cases that you have identified. Discuss the (theoretical) efficiency of your implementation
and list any optimizations that you have performed.
Note: You must not change the prototype of the draw_triangle_solid function.
6 marks
2.5 Drawing triangles with barycentric coordinates
Consider the function draw_triangle_interp. Like the previous drawing functions, it is declared in the
draw2d/draw.hpp header and defined in draw2d/draw.cpp. This function draws a single triangle defined
by its three vertices (aP0, aP1 and aP2). Each vertex is assigned a color (aC0, aC1 and aC2, respectively). These
colors should be interpolated across the triangle. Implement the function by computing barycentric coordi nates for points/pixels. Use the barycentric coordinates to determine if a point/pixel is inside the triangle. If
so, use the barycentric coordinates of the point to compute an interpolated color for that point.
Unlike earlier examples, the colors are specified in linear RGB (ColorF). You should perform the interpolation
in linear RGB space and only convert to the 8-bit sRGB representation when writing the color value to the
surface.
Run the separate tests as in Section 2.4. In your report, briefly describe your implementation and highlight the
most important differences to the previous approach.
COMP3811 - Coursework 1 5
Figure 4: Approaching the earth (lithobraking not yet implemented!).
Note: You must not change the prototype of the draw_triangle_interp function.
6 marks
2.6 Blitting images
In the final task, you will implement image blitting with alpha masking. Consider the blit_masked function
declared in draw2d/image.hpp and defined in draw2d/image.cpp. You will also need to implement a few
helper functions in draw2d/image.inl. Search for lines containing the string // TODO.
You should blit the input image (aImage of type ImageRGBA) to the position specified by aPosition. Input
pixels with an alpha value (a component of the Color_sRGB_Alpha color struct) less than 128 should be dis carded.
If you have implemented the method correctly, you should find the earth after flying a bit to the right – it will
be off-screen initially (see teaser image and Figure 4).
In your report, describe your implementation of the blit. Discuss the efficiency of your implementation. Are
there any optimizations that you can think of?
Note: You must not change the prototype of the blit_masked function. You must not change the ImageRGBA
class and the load_image function.
6 marks
2.7 Your own space ship
The default space ship shape is defined in main/spaceship.cpp. It consists of a number of points that are
connected by lines.
Define your own custom space ship (see instructions in the source code). You must not use more than 32
points. The ship shape must show some amount of complexity and creativity. In your report, indicate if you
have created a custom design and include a screenshot of your custom ship.
Please indicate in the source code (see comments) whether you would allow us to use your ship shape in
future iterations of the COMP3811 module (for example as non-player ships). Your choice here does not affect
the marking of this task.
1 mark
Wrapping up
Please double-check the requirements in Section 1 and ensure that your submission conforms to these. In
particular, pay attention to file types (archive format and report format) and ensure that you have not included
any unnecessary files in the submission. Make sure that you have tested your code (compile and run) in both
debug and release modes.