联系方式

  • QQ:99515681
  • 邮箱:99515681@qq.com
  • 工作时间:8:00-23:00
  • 微信:codehelp

您当前位置:首页 >> C/C++程序C/C++程序

日期:2021-10-17 07:26

Assignment 3
1/5 Assignment 3
Due 25 Oct by 16:59 Points 100
Assignment 3 - Paxos
Marks
For undergraduates, the marks awarded for this assignment are worth 30% of the total mark for DS.
For postgraduate students, the marks awarded for this assignment are worth 20% of the total mark
for DS.
PLEASE NOTE: If your code does not compile and run the awarded mark is an automatic zero.
Our expectation is that you are able to code and submit a tested and working copy of your code.
There will not be any partial marks and you are expected to debug and fix errors and test that your
code works on the Linux image at University (CATS machines or ssh remotely to
uss.cs.adelaide.edu.au ).
Assignment Description
Objective
To gain an understanding of consensus and voting protocols in the presence of failures of one or
more of the participants.
Welcome to the Suburbs Council Election!
This year, Suburbs Council is holding elections for council president. Any member of its nine person
council is eligible to become council president.
Member M1 – M1 has wanted to be council president for a very long time. M1 is very chatty over
social media and responds to emails/texts/calls almost instantly. It is as if M1 has an in-brain
connection with their mobile phone!
Member M2 – M2 has also wanted to be council president for a very long time, except their very long
time is longer than everybody else's. M2 lives in a remote part of the Suburbs and thus their internet
connection is really poor, almost non-existent. Responses to emails come in very late, and
sometimes only to one of the emails in the email thread, so it is unclear whether M2 has
read/understood them all. However, M2 sometimes likes to work at Café @ Bottom of the Hill. When
that happens, their responses are instant and M2 replies to all emails.
Member M3 – M3 has also wanted to be council president. M3 is not as responsive as M1, nor as
late as M2, however sometimes emails completely do not get to M3. The other councilors suspect
that it’s because sometimes M3 goes on retreats in the woods at the top of the Suburbs, completely
disconnected from the world.
Assignment 3
2/5
Members M4-M9 have no particular ambitions about council presidency and no particular
preferences or animosities, so they will try to vote fairly. Their jobs keep them fairly busy and as such
their response times will vary.
How does voting happen: On the day of the vote, one of the councilors will send out an
email/message to all councilors with a proposal for a president. A majority (half+1) is required for
somebody to be elected president.
YOUR TASK:
Write a program that implements a Paxos voting protocol for Suburbs Council President that is fault
tolerant and resilient to various failure types, some of which are shown in the above. Communication
happens strictly via sockets. You are responsible for the message design.
Assessment
Your assignment will be marked out of 100 points, as following:
10 points - Paxos implementation works when two councillors send voting proposals at the same
time
30 points – Paxos implementation works in the case where all M1-M9 have immediate responses
to voting queries
30 points – Paxos implementation works when M1 – M9 have responses to voting queries
suggested by the profiles above, including when M2 or M3 propose and then go offline
20 points – Testing harness for the above scenarios + evidence that they work (in the form of
printouts)
10 points for the quality of your code:
Code Quality Checklist
Do!
o write comments above the header of each of your methods, describing
o what the method is doing, what are its inputs and expected outputs
o describe in the comments any special cases
o create modular code, following cohesion and coupling principles
Don’t!
o use magic numbers
o use comments as structural elements (see video)
o mis-spell your comments
o use incomprehensible variable names
o have long methods (not more than 80 lines)
o allow TODO blocks
Bonus
Assignment 3
3/5
10 points – Paxos implementation works with a number ‘n’ of councilors with four profiles of
response times: immediate; medium; late; never
50 points – (you can use these points in this assignment, or in any other subsequent assignment)
– Fast Byzantine Paxos implementation that works when councilors lie, collude, or intentionally do
not participate in some voting queries but participate in others.
Handin
Use the Websubmission system.
IMPORTANT If your code does not compile and run the awarded mark is 0. For details on how to
submit this exercise read through the steps of this assignment.
Procedure for this Assignment
Step 0: Getting to know Subversion
Subversion, also known as svn, is a powerful version control system to help maintain a coherent
copy of a project that can be worked on from multiple locations. We will use Subversion as the
handin mechanism throughout this course. Click here (http://www.cs.adelaide.edu.au/docs/svn- instr.pdf) to learn about the features of interest to us.
Step 1: Creating the assignment directory in your svn repository
Current versions of the svn client program.
Open a terminal window on your machine, and cut-and-paste the following command:
svn mkdir --parents -m "assignments" https://version-control.adelaide.edu.au/svn/aXXXXXX/YYYY/s2/ds/assig
nment3 (https://version-control.adelaide.edu.au/svn/aXXXXXX/YYYY/s2/ds/assign1)
This command will create an empty directory named YYYY/s2/ds/assignment3 in an svn repository
that we have set up for you on the machine version-control.adelaide.edu.au. Your svn repository is
called https://version-control.adelaide.edu.au/svn/aXXXXXXX/
Note: Replace XXXXXXX with your student ID and YYYY with the four digits representing the year
we are in.
Old versions of the svn client program.
NOTE Older versions of the svn client, (pre 1.5), do not support the --parents option. If you are using
an older client, the following explicit steps must be used to create the YYYY/s2/ds/assignment3
directory in your svn repository. If a directory already exists and you attempt to recreate it, you will
receive an error message complaining about MKCOL.
Create the YYYY directory if it does not exist.
svn mkdir -m "assignment 0" https://version-control.adelaide.edu.au/svn/aXXXXXXX/YYYY (https://version?control.adelaide.edu.au/svn/aXXXXXXX/YYYY)
Assignment 3
4/5 (https://version-control.adelaide.edu.au/svn/aXXXXXXX/YYYY) Create the YYYY/s2 directory if it
does not exist.
svn mkdir -m "assignment 0" https://version-control.adelaide.edu.au/svn/aXXXXXXX/YYYY/s2 (https://versi
on-control.adelaide.edu.au/svn/aXXXXXXX/YYYY/s2)
Create the YYYY/s2/ds directory if it does not exist.
svn mkdir -m "assignment 0" https://version-control.adelaide.edu.au/svn/aXXXXXXX/YYYY/s2/ds (https://ve
rsion-control.adelaide.edu.au/svn/aXXXXXXX/YYYY/s2/ds)
Create the YYYY/s2/ds/assignment3 directory.
svn mkdir -m "assignment 0" https://version-control.adelaide.edu.au/svn/aXXXXXXX/YYYY/s2/ds/assignment3
(https://version-control.adelaide.edu.au/svn/aXXXXXXX/YYYY/s2/ds/assign1)
Step 2: Checking out a working version of your assignment.
In your home account, change to a directory above the one where you want to place your working
files for this assignment. Then type:
svn checkout https://version-control.adelaide.edu.au/svn/aXXXXXXX/YYYY/s2/ds/assignment3 ds-YY-s2-assign3
A new directory called ds-YY-s2-assign3 will now be created in your current working directory. The
contents of this now become a working-copy of the files for all assignments for this offering of
Distributed Systems. Note that this working copy contains hidden sub-directories needed by svn to
operate correctly.
Note that you can have more than one working copy of a project. For example you could have one
working copy at home and one at university and you can use svn to help keep them in sync. See the
svn documentation (http://www.cs.adelaide.edu.au/docs/svn-instr.pdf) for details on how this can
be done. However, for now, we will assume you have just the one working copy.
Step 3: Saving your files in your repository
The assignments require you to edit and create files. If you create a new file or directory that is part
of your assignment you must add it to the list of files managed by svn. You can add a file, Test.java,
to the svn repository by typing:
svn add Test.java
Note that the directory containing the new file must already have been added to svn.
As you work on your assignment, you should commit your changes early and often. That is, you
should regularly ask svn to copy changed files in your working copy to your repository. To commit
your files to the repository you change to the directory containing the working copy of your files and
type:
svn commit -m "meaningful message about what I just changed."
Assignment 3
5/5
Note, that the message after the -m in the line above can be anything. However, it should be relevant
to the state of the project at this moment. Also note that running commit is the only way your
repository will get to know about the latest versions of your files. When we mark your submission we
will look at what has been committed to your repository and, also, how often and what times you
committed to your repository.
There are two major benefits to be gained by maintaining an up to date copy of your assignment in
the svn repository. Firstly, svn can act as a backup mechanism. If you accidentally lose a file you can
retrieve it from the svn repository. Secondly, when you post questions on the forums the lecturer(s)
can access your svn repository and give you more helpful answers.
Step 4: Assignment Submission
The next step is to submit your assignment using the Computer Science Web Submission System
(https://cs.adelaide.edu.au/services/websubmission/) . You will need to submit:
Your code
Your testing harness + evidence that the above tests work
A readme file containing instructions about how to compile and run your code
By now you have written your assignment, committed your changed files to the repository along the
way and thoroughly tested them. The Web Submission System will not mark your assignment but will
perform some limited checks using the current versions of your files in your repository. When you
attempt to make a new submission you will be presented with an assessment cover sheet. This
includes a link to your repository so you can check what files you are submitting. The cover sheet
also includes a declaration that you are submitting your own work.
Note that, if the testing highlights some errors then you can always edit your files, commit them and
make a new submission using the Web Submission System.

版权所有:留学生编程辅导网 2021,All Rights Reserved 联系方式:QQ:99515681 电子信箱:99515681@qq.com
免责声明:本站部分内容从网络整理而来,只供参考!如有版权问题可联系本站删除。